function h = cbarrow(options)
%% cbarrow documentation
% The cbarrow function places triangle-shaped endmembers on colorbars to
% indicate that data values exist beyond the extents of the values shown in
% the colorbar.  
% 
% This function works by creating a set of axes atop the current figure and 
% placing patch objects on the new axes.  Thus, editing a figure after
% calling cbarrow may cause some glitches.  Therefore, it is recommended to call
% cbarrow last when creating plots. 
% 
%% Syntax 
% 
%  cbarrow
%  cbarrow(Direction) 
%  cbarrow('delete')
%  h = cbarrow(...)
% 
%% Description
% 
% cbarrow places triangle-shaped endmembers on both ends of the current
% colorbar. 
% 
% cbarrow(Direction) specifies a single direction to place a colorbar end
% arrow.  Direction can be 'up', 'down', 'right', or 'left'. 
% 
% cbarrow('delete') deletes previously-created cbarrow objects. 
% 
% h = cbarrow(...) returns a handle of the axes on which cbarrow
% objects are created.  
% 
%% Example 1: Both directions
% 
% surf(peaks)
% axis tight
% colorbar 
% caxis([0 3]) 
% cbarrow
% 
%% Example 2: One direction
% 
% surf(peaks) 
% axis tight
% colorbar('southoutside') 
% colormap(brewermap(256,'*RdBu'))
% caxis([-7 7]) 
% cbarrow('right') 
% 
%% Known issues 
% This function only works once per figure.  If you have multiple subplots,
% you can only use it once, and you'll have to call cbarrow last.  Also, 
% editing plots after calling cbarrow can sometimes be a bit glitchy. 
% 
%% Author Info
% The newcolorbar function was written by Chad A. Greene of the 
% University of Texas at Austin's Institute for Geophysics (UTIG), August 2015. 
% Updated June 2016 to fix a bug in cbarrow('down'), thanks to Aodat for pointing this out. 
% http://www.chadagreene.com.
% 
% See also caxis and colorbar.
%% Error checks: 
assert(verLessThan('matlab','8.4.0')==0,'Sorry, the cbarrow function requires Matlab R2014b or later.') 
narginchk(0,1) 
%% Guess which arrows to create based on current colorbar orientation:
% Find handles of all colorbars in current figure: 
hcb = findobj(gcf,'Type','Colorbar'); 
% If no colorbars exist in current figure, create a new one: 
if isempty(hcb)
    cb = colorbar; 
else
    % Otherwise, use the most recent colorbar in the list: 
    cb = hcb(1); 
end
    
cbpos = cb.Position; 
ax1 = gca; 
ax1pos = get(ax1,'OuterPosition');
% If the colorbar is wider than it is tall, make left and right arrows: 
if cbpos(4)<cbpos(3)
    makerightarrow = true; 
    makeleftarrow = true; 
    makeuparrow = false; 
    makedownarrow = false; 
else
    % Otherwise make up and down arrows: 
    makerightarrow = false; 
    makeleftarrow = false; 
    makeuparrow = true; 
    makedownarrow = true; 
end
%% Override automatic arrow selection if user requested a specific arrow: 
if nargin>0 
    switch lower(options)
        case {'del','delete'}
            try
                h_cbarrow = findobj(gcf,'tag','cbarrow'); 
                delete(h_cbarrow); 
            end
            return
            
        case {'r','right'}
            makerightarrow = true; 
            makeleftarrow = false; 
            
        case {'l','left'}
            makeleftarrow = true; 
            makerightarrow = false; 
            
        case {'u','up'} 
            makeuparrow = true; 
            makedownarrow = false; 
            
        case {'d','down'} 
            makedownarrow = true; 
            makeuparrow = false; 
            
        otherwise
            error('Invalid input in cbarrow. Must be ''up'',''down'', ''left'', ''right'', ''delete'', or no inputs at all for automatic cbarrowing.') 
    end
end
%% Shrink position of the colorbar to allow room for arrows: 
if makerightarrow
    cbpos = cbpos + [0 0 -cbpos(4)*sqrt(2)/2 0];
    cb.Position = cbpos; 
end
if makeleftarrow
    cbpos = cbpos + [cbpos(4)*sqrt(2)/2 0 -cbpos(4)*sqrt(2)/2 0];
    cb.Position = cbpos; 
end
if makeuparrow 
    cbpos = cbpos + [0 0 0 -cbpos(3)*sqrt(2)/2];
    cb.Position = cbpos; 
end
if makedownarrow 
    cbpos = cbpos + [0 cbpos(3)*sqrt(2)/2 0 -cbpos(3)*sqrt(2)/2];
    cb.Position = cbpos; 
end
%% Create triangle arrows as patch objects in new axes: 
% Get colormap so we know what color to make the triangles: 
cm = colormap; 
% Create background axes on which to plot patch objects: 
h = axes('position',[0 0 1 1],'tag','cbarrow');
hold on
% Plot arrows: 
if makerightarrow 
    rightarrowx = (cbpos(1)+cbpos(3)) + [0 cbpos(4)*sqrt(2)/2 0 0]; 
    rightarrowy = cbpos(2) + [0 cbpos(4)/2 cbpos(4) 0]; 
    hr = patch(rightarrowx,rightarrowy,cm(end,:),'EdgeColor',cm(end,:)); 
end
if makeleftarrow
    leftarrowx = cbpos(1) + [0 -cbpos(4)*sqrt(2)/2 0 0]; 
    leftarrowy = cbpos(2) + [0 cbpos(4)/2 cbpos(4) 0]; 
    hl = patch(leftarrowx,leftarrowy,cm(1,:),'EdgeColor',cm(1,:)); 
end
if makeuparrow
    uparrowx = cbpos(1) + [0 cbpos(3) cbpos(3)/2 0]; 
    uparrowy = cbpos(2)+cbpos(4) + [0 0 cbpos(3)*sqrt(2)/2 0]; 
    hu = patch(uparrowx,uparrowy,cm(end,:),'EdgeColor',cm(end,:)); 
end
if makedownarrow
    downarrowx = cbpos(1) + [0 cbpos(3) cbpos(3)/2 0]; 
    downarrowy = cbpos(2) + [0 0 -cbpos(3)*sqrt(2)/2 0]; 
    hd = patch(downarrowx,downarrowy,cm(1,:),'EdgeColor',cm(1,:)); 
end
%% Change edge colors: 
if strcmpi(cb.Box,'on')
    
    % Get starting color and linewidth of colorbar box: 
    linecolor = cb.Color; 
    linewidth = cb.LineWidth; 
    
    % Turn off colorbar box and we'll create a new one: 
    cb.Box = 'off'; 
    
    % Edge line for left and right arrows: 
    if all([makerightarrow makeleftarrow])
        line(cbpos(1) +[0 cbpos(3) cbpos(3)+cbpos(4)*sqrt(2)/2 cbpos(3) 0 -cbpos(4)*sqrt(2)/2 0],...
            cbpos(2) + [0 0 cbpos(4)/2 cbpos(4) cbpos(4) cbpos(4)/2 0],...
            'color',linecolor,'LineWidth',linewidth)
    end
    
    % Edge line for right only: 
    if all([makerightarrow ~makeleftarrow])
        line(cbpos(1) +[0 cbpos(3) cbpos(3)+cbpos(4)*sqrt(2)/2 cbpos(3) 0 0],...
            cbpos(2) + [0 0 cbpos(4)/2 cbpos(4) cbpos(4) 0],...
            'color',linecolor,'LineWidth',linewidth)
    end
        
    % Edge line for left arrow only: 
    if all([~makerightarrow makeleftarrow])
        line(cbpos(1) +[0 cbpos(3) cbpos(3) 0 -cbpos(4)*sqrt(2)/2 0],...
            cbpos(2) + [0 0 cbpos(4) cbpos(4) cbpos(4)/2 0],...
            'color',linecolor,'LineWidth',linewidth)
    end
    
    % Edge line for up and down arrows: 
    if all([makeuparrow makedownarrow])
        line(cbpos(1) +[0 0 cbpos(3)/2 cbpos(3) cbpos(3) cbpos(3)/2 0],...
            cbpos(2) + [0 cbpos(4) cbpos(4)+cbpos(3)*sqrt(2)/2 cbpos(4) 0 -cbpos(3)*sqrt(2)/2 0],...
            'color',linecolor,'LineWidth',linewidth)
    end
    
    % Edge line for up arrow only: 
    if all([makeuparrow ~makedownarrow])
        line(cbpos(1) +[0 0 cbpos(3)/2 cbpos(3) cbpos(3) 0],...
            cbpos(2) + [0 cbpos(4) cbpos(4)+cbpos(3)*sqrt(2)/2 cbpos(4) 0 0],...
            'color',linecolor,'LineWidth',linewidth)
    end
    
    % Edge line for down arrow only: 
    if all([~makeuparrow makedownarrow])
        line(cbpos(1) +[0 0 cbpos(3) cbpos(3) cbpos(3)/2 0],...
            cbpos(2) + [0 cbpos(4) cbpos(4) 0 -cbpos(3)*sqrt(2)/2 0],...
            'color',linecolor,'LineWidth',linewidth)
    end
end
%% Clean up: 
axis off
axis([0 1 0 1]) 
% If original current axes were resized, unresize them: 
set(ax1,'OuterPosition',ax1pos)
switch lower(cb.Location) 
    case {'south','east','north','west'} 
        % Bring our arrow patch object axes to the front if the colorbar is inside the current axes: 
        axes(h)
    otherwise
        % Bring user's data axes to the front: 
        axes(ax1) 
end
% Delete output if user did not request it: 
if nargout==0
    clear h
end
end